SEAMLESS TECHNOLOGY

CONNECTING WITH TECHNOLOGY

Seamless, is knitting technology that will work as a second skin due to its permanent contact with it and with the least number of seams to ensure maximum comfort and the resulting advantages of the action obtained from the localized and/or progressive multidirectional compression

SECOND SKIN

Advantages to be vantages to be gained by using fibers:

Thermal management

Hydration

Fit slim

Anti-odor

No chemical finishes

Permanent properties

MULTIFUNCTIONALITY WITH BENEFITS FOR THE USER

Localized and / or progressive multidirectional compression

Directional increase in blood flow

Reduced feeling of tiredness

Increased instant muscle power

Areas of greater ventilation

High breathability

Heating zones

Active term

Moisture management

Dry skin / permanent freshness

REDUCED NUMBER OF SEAMS

The technology allows sequencing the desired structures without the need for seams.

Increases comfort.

blank

Did you know?

The articles produced from this technology almost always contain a certain percentage of elastane or spandex. This fiber, if exposed regularly to high temperatures, tends to lose its main characteristic, recovery after stretching.

The construction of the mesh can cause a texture with an “orange peel” effect resulting from the use of thread with opposite twists. This is not a defect, but an effect due to technology.

We also advise:

The process of dyeing the fibers in a seamless mesh, doesn’t allow a more intense prevention of the color fastness at high temperatures and forces the washing to be carried out with low temperatures, of 30 and 40ºC. This apparent fragility results from the fact that dyeing temperature is less than 100oC and is an added value for environmental sustainability due to the reduced consumption of energy resources.

blank
blank

Never pull a “pulled wire” or a wire end. The mesh is stretched both horizontally and vertically until the yarn is reintegrated. To cut is to render the article useless.

Colors must be protected, always washing separately; light colors, medium colors and dark colors.

They cannot be washed with other articles that have metallic accessories or of great rigidity, since the abrasion resistance islimited taking into account that the threads are regularly microfibers or multifibers with a high number of filaments, thus avoiding the appearance of “pulls” or “leaky meshes”

If you use the iron, it should only be at a minimum temperature, to protect the elastane or spandex. Mostly, it is not recommended that they be subjected to ironing, and in some cases, when in the presence of the polypropylene fiber, this possibility is prohibited because this fiber melts at 110oC.

blank
blank

Wearing a seamless item may require technique, such as Legging, which should be worn just like a leotard or socks; feet first and then unfolds as it moves up the legs.

Never accept to wear a size below the recommended because it not only adulterates the functionalities but also jeopardizes the quality of the fabric.

Please pay attention:

All articles have legal information about care and must be respected, otherwise they will cause irreparable damage.

blank
blank

Did you know?

The articles produced from this technology almost always contain a certain percentage of elastane or spandex. This fiber, if exposed regularly to high temperatures, tends to lose its main characteristic, recovery after stretching.

The construction of the mesh can cause a texture with an “orange peel” effect resulting from the use of thread with opposite twists. This is not a defect, but an effect due to technology.

blank

We also advise:

The process of dyeing the fibers in a seamless mesh, doesn’t allow a more intense prevention of the color fastness at high temperatures and forces the washing to be carried out with low temperatures, of 30 and 40ºC. This apparent fragility results from the fact that dyeing temperature is less than 100oC and is an added value for environmental sustainability due to the reduced consumption of energy resources.

blank

Never pull a “pulled wire” or a wire end. The mesh is stretched both horizontally and vertically until the yarn is reintegrated. To cut is to render the article useless.

Colors must be protected, always washing separately; light colors, medium colors and dark colors.

blank

They cannot be washed with other articles that have metallic accessories or of great rigidity, since the abrasion resistance islimited taking into account that the threads are regularly microfibers or multibras with a high number of filaments, thus avoiding the appearance of “pulls” or “leaky meshes”

If you use the iron, it should only be at a minimum temperature, to protect the elastane or spandex. Mostly, it is not recommended that they be subjected to ironing, and in some cases, when in the presence of the polypropylene fiber, this possibility is prohibited because this fiber melts at 110oC.

blank

Wearing a seamless item may require technique, such as Legging, which should be worn just like a leotard or socks; feet first and then unfolds as it moves up the legs.

Never accept to wear a size below the recommended because it not only adulterates the functionalities but also jeopardizes the quality of the fabric.

blank

Please pay attention:

All articles have legal information about care and must be respected, otherwise they will cause irreparable damage.

WHAT IS OUR

MISSION

We offer luxury active wear pieces, sustainable and based on an ecological policy. We want to create a community that believes in what we believe in, that we can all do better every day, in favor of a better future, a better planet. 

Our fibers, accessories, packaging, and everything that is part of beeket, is made in order to have the least possible impact on the planet. One for all and they already know the rest.